OPERATIONAL INSTRUCTIONS
11
SC4000 Pos 5
V23C_09.13
CLUTCH LEVER
HORI ZON TAL
DRIVE
LEVER POSITIONS
TOWING
NOTE!
IT IS RECOMMENDED THAT TWO (2) PERSONS WILL TAKE CARE OF THE
PLATFORM´S TRANSFER: ONE WILL CON TROL THE Pendant CONTROL AND THE
OTHER WILL STEER THE UNIT BY TOW BAR.
NOTE!
DURING THE TOWING THE CLUTCH OF DRIVING GEAR MOTOR HAS TO BE DIS-
CONNECTED.
Drawing 5.8. Chassis drive unit
and arm positions.
!
LIMIT SWITCH BYPASS
When the platform has been low-
ered to the rubber buffers the lower
safety limit shall be bypassed to lift
the platform to the normal opera-
tional height.
The lower safety limit is bypassed
pushing a bypass button on the
platform electric box and pushing
simultaneously up-button.
Before bypassing the limit switch it
must be settled out why the platform
has reached the safety limit!
-S3
+OP2
To Next Page
Loading...