EasyManua.ls Logo

SCANCLIMBER SC4000 - Page 28

SCANCLIMBER SC4000
166 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Technical information
10
V23C_09.13
SC4000 Pos 2
!! GET ACQUAINTED WITH THE
LOADING TABLES BE FORE
ASSEMBLING EX TENSIONS !!
Platform length Extension width
SC4000 max. 10,5 m 1,4 m
SC4000 twin max. 18,3 m 1,4 m
Drawing 2.7. Telescopic ex tension.
! !
20-0295-301-1
The frame of the telescopic platform con-
sistsofxedguidingtube,extension-and
railing tubes. The guiding tube is un der
the plat form section. The extension tube
is situated inside the guiding tube and
can be pulled out and locked to desired
length. The railing tube should be locked
to ex tension tube.
3 pieces of extension tubes and railing
tubes are needed for each platform sec-
tion. Furthermore 2 square railing tubes
are needed for both ends of extension
platform.
In pictures the extensions for SC4000 will
be described. According to the total
length of the platform the extensions are
as follows:
NOTE !
THE PLYWOOD BOARD WHICH
WILL BE ASSEMBLED ONTO THE EX-
TENSION TUBES MUST BE AT LEAST
22 MM THICK.

Table of Contents