Chapter 3: Installation
Getting Ready to Scan
Operator’s Guide 71
program, select ConfigurePaths. For the
application path, browse to C:\Program
Files\Scantron\ScanTools Plus\Applications.
Click OK, then try to select the application again.
If this does not resolve the issue, contact Scantron
Customer Support as described in “Requesting
Support” on page 125.
3. Load the test forms:
a. Find the pack of 16 pre-slugged (answers filled in)
General Purpose Answer Sheets #223127 (pack
number 202-521-006).
These sheets have been marked with sample data.
The 710 - Data Collection Test sample
application is set up to collect only the Name data
from these sheets.
b. Jog (tap on hard surface) the sheets to align them.
c. Place the sheets into the input tray of the scanner
with the printed side down, and so that the three
To Next Page
Loading...
