14 2 Safety notes
2.9 Repairs
When the machine must be ready for operation
during repairs, special caution is required.
Ensure that there are no persons in the danger area under any circumstances.
If safety facilities must be disassembled for repairs, they must be assembled and re-
viewed again after completion of the repair work.
Damaged safety devices must be replaced.
2.10 Disassembly and disposal
National and international provisions must be observed for disposal of the machine.
In the area of moving parts. Crushing
of limbs. Shut down machine before
service work.
In the area of the transport rollers.
Limbs may be pulled in and crushing
may result. Power down the machine
and secure it against reactivation.
To Next Page
Loading...