Schwarz SB10B - 7.3 Side cleaning troubleshooting

44 7 Interference and remedies
7.3 Side cleaning
Table 7.3 Side cleaning - measures at faults
No side cleaning
Error
Cause
Remedies
No power
- motor protection tripped
- check cause (E)
- control defective
- check (E)
- connections
- check (E)
- brush motor defective
- check (E)
Drive
- motor defective
- check (E)
- connections
- check (E)
Setting
- press-on
- setting
- scraper
- setting
- brush
- replace
Side cleaning too strong or too weak
Error
Cause
Remedies
Brushes
- press-on too strong
- reset
- press-on too weak
- readjust
- brush
- replace
Scraper
- press-on too strong
- reset
- press-on too weak
- readjust
- scraper
- replace
The measures marked "(E)" must only be performed by an
electrician