3. Operation area
This area displays contents of the screen.
For example, on the “Count” screen, the area displays function buttons related to
sample analysis as well as the sample analysis results.
4. Other information
This area displays the current system time.
When error occurs, the area displays the error message.
When logged in as an administrator, the area displays “Administrator”.
5. Auxiliary information area
This area displays auxiliary information of the current screen.
For example, on the “Count” screen, the area displays the ID and analysis mode of
the next sample; on the “Table Review” or “Graph Review” screen, the area displays
position of the current sample and total number of samples.
2.5 Reagents, controls and calibrators
As the analyzer, reagents, controls and calibrators are components of a system, performance
of the system depends on the combined integrity of all components. You must only use the scil
animal care company-specified reagents, controls, and calibrators which are formulated
specifically for the fluidic system of your analyzer in order to provide optimal system
performance. Do not use the analyzer with reagents, controls, and calibrators from multiple
suppliers. In such case, the analyzer may not meet the performance specified in this manual
and may provide unreliable results.
To Next Page
Loading...
Need help?
General
