scil Element HT5+ - Connection of the Peripherals

Vers.: 20230710ENG
Page 28
4.3.2 Connection of the peripherals
If peripherals have to be connected, connect them as shown in the following figures. Make
sure the connections are correct and firm.
*Connection of a USB stick 3.0 (1), a USB stick 2.0 (2) or a network cable (3)
CAUTION
Be sure to use the specified external devices only and keep them away from water.
NOTE:
• The user should ensure the data safety of the USB devices connecting to the analyzer.
• When the analyzer is connected to an external computer, install anti-virus software on the
computer to prevent the analyzer from infecting computer virus. Do not use it for
unintended.