scil Element HT5+ - 6.2.6 Calculating CV Values; 6.2.7 Printing Results; 6.2.8 Transmitting Results to LIS

Vers.: 20230710ENG
Page 39
6.2.6 Calculating CV values
1. Select multiple samples (at least 3) for which you want to calculate the CV values from
the “Table Review” screen.
2. Tap CV to display the “CV” dialog box.
3. The screen displays the mean value, the SD value and the CV value for each
parameter.
6.2.7 Printing results
1. Select one or more sample records to be printed.
2. Tap PRINT to display the “Print” dialog box.
3. Select the desired print method (“Table print” to only print the results; “Graph print” to
also print the graphs).
4. Tap OK to print the sample records.
6.2.8 Transmitting results (requires connection to LIS)
1. Select samples to be transmitted from the “Table Review” screen.
2. Tap COMM. to display the “Comm.” dialog box.
3. Select the “Selected records” button or the “All records” button to transmit all the
records.
4. Tap OK to start transmitting the corresponding sample records to the data management
software.
6.2.9 Exporting results (for administrators only)
CAUTION
Before exporting sample records, make sure that you have inserted a safe USB flash drive
into the USB port of the analyzer.
1. Select samples to be exported from the “Table Review” screen.
2. Tap EXPORT to display the “Export” dialog box.
3. Select the "Selected records" button or the “All records” button to export all the records.
4. Tap OK to export the corresponding sample records to the USB device.