Sea-doo 2004 3D RFI Shop Manual

Section 14 STEERING SYSTEM
Subsection 02 (ALIGNMENT)
Loosen 2 bolts retaining block at cable support.
Turn adjustment nut as required.
F22K0AA
1
2
3
1. Support
2. Adjustment nut
3. Loosen bolts
After adjustment, torque retaining block bolts to
5N•m(44lbf•in).
CAUTION: Verify when the handlebar is turned
completely to the left or right side, that there is
no interference with venturi or VTS ring.
Reinstall top cover.
80 smr2004-3D
www.SeaDooManuals.net

Sea-doo 2004 3D RFI Specifications

General

Brand	Sea-doo
Model	2004 3D RFI
Category	Boat
Language	English