Seatex DPS 200 - Page 68

Seatex DPS 200 Installation Manual, rev. 4 Appendix D - DPS setup file
56
! DPGGA NMEA UKOOA/IMCA DGPS Interfacing format. *
! WARNING: Not fully compatible with GPGGA. Systems not *
! distinguishing talker ID in the NMEA telegrams might*
! face problems with this telegram ! *
! GST GNSS Pseudorange Error Statistics *
! VTG Course over ground and ground speed *
! VTG_2.2 Course over ground and ground speed up to NMEA 0183 v2.2 *
! ZDA Time & Date string *
! GLL Geographic Position - Latitude/Longitude *
! GLL_2.0 GLL as in NMEA 0183 version 2.0 *
! GLL_1.5 GLL as specified for the Magnavox MX 4200 GPS receiver *
! PSXN_23 Seatex proprietary message for integrated phase vector output*
! CRYPT_FUG Cryptated position output *
! GSA GNSS DOP and Active Satellites *
! GSV GNSS Satellites in View *
! ARABB Absolute position (ABB DP) *
! ABBDP Non-NMEA ABB DP telegram with Position, speed and course *
! ARTEMIS Non-NMEA ARTEMIS emulation (BCD,01 telegram) *
! WSTRAND Non-NMEA Westerstrand telegram. Local time output. *
! WARNING: Compatible with DARPS12, but not Y2K compatible ! *
! WSTRAND_Y2K Westerstrand telegram - Y2K compatible *
! *
[dpinterface]
DPIO_1 com8 9600 n 8 1 nh
DATUM_1 WGS84
OUTPUTMODE_1 0
OUTPUTINTV_1 1000
NMEA_OUTPUT_1 GPGGA
TIME_PRECISION_1 2
POSITION_PRECISION_1 6
UTM_MODE_1 0
UTM_ZONE_1 -1
UTM_ZONE_OFFSET_1 0.0
DPINTERFCONSOLE_1 0
DPIO_2 com9 9600 n 8 1 nh
DATUM_2 WGS84
OUTPUTMODE_2 0
OUTPUTINTV_2 1000
NMEA_OUTPUT_2 GPGGA
TIME_PRECISION_2 2
POSITION_PRECISION_2 6
DPINTERFCONSOLE_2 0
DPIO_3 com10 4800 n 8 1 nh
DATUM_3 WGS84
OUTPUTMODE_3 0
OUTPUTINTV_3 1000
NMEA_OUTPUT_3 GLL, VTG
TIME_PRECISION_3 2
POSITION_PRECISION_3 6
DPINTERFCONSOLE_3 0
!---------------------- SATELLITE AND FIX COMPUTATION RELATED -----------------*
! General GPS settings:
!
! ELEVATION MASK [deg] The limit for minimum satellite elevation allowed
! in fix computation
! HDOP LIMIT If HDOP exceeds this limit, no position or
! velocity fix is computed
! PDOP LIMIT If PDOP exceeds this limit, no position or
! velocity fix is computed
! HEIGHT AID See description below.
! AIDED STDV [m] Accuracy of height information.
! AIDED HEIGHT [m] Initial value for filtered height aiding. The value
FSP ref.: A11213500XRBRA0