Seca 103 - Page 50

50 • secaconnect 103/seca 452
17-10-01-266-002a/07-2018B
CAUTION!
Personal injury, damage to device
In the raised position, the scale is not steady.
► Use a second person to lift and hold the scale.
► If the scale needs to be held in a raised position for a longer period
of time, secure it with suitable means to prevent it from falling over.
CAUTION!
Personal injury, damage to device
For some models of the scale, a folding seat is installed. Fingers can
get crushed or the scale can be damaged if the folding seat is not
folded up and secured.
► Fold the folding seat up and fold the legs of the seat in completely.
► Secure the folding seat with the locking bar.
► Follow the information in the instructions for use for the device.
NOTE
For
seca 676, seca 677, seca 684 and seca 685: Skip the following two
steps and continue with step 8.
6. Lift the scale carefully so that the bottom of the weighing platform is
accessible.
7. Remove the battery block:
a) Loosen the screws of the battery compartment
b) Remove the lid of the battery compartment
c) Remove battery block from the battery compartment and pull out
the connector cable
d) Screw the lid onto the battery compartment
8. Store the power supply unit and the battery block (if present) or dispose of
them properly (➔ Disposal).