Secutron MR-2300T User Manual

86
11.11.4 Command Menu/Dialer Config-->Time Parameters
Note: Refer to section 11.2.1 on page 64 for detailed instructions on making menu
selections.
Command Menu/Dialer-Config/Time Parameter
1.AC Loss delay
0 ->Default
Use this menu to delay the
reporting of AC loss trouble
on the dialer for the
programmed time period.
Command Menu/Dialer-Config/Time Parameter
2.Cellular report date
0 ->Default
To comply with UL 864 10th
edition, leave this setting at
0.
Use this menu to set the
test report date for the cell
phone setup. Set this menu
to 0 if there is no test
reporting for a cell phone,
or if the phone line is a
regular line. Set this menu
from 01 to 28 to schedule a
test for Line 2 on a certain
day of the month. See
section 11.11.5 for more
information.
When a cell phone service
is employed for the panel, it
should only be connected
to telephone line #2 CO
interface. Also, the dial
tone detection feature of
Line 2 should be disabled
for cell phone application.
i
1 AC-Loss Delay
2 Cellphone Date
3 Auto-Test Time
-Time Parameter-
AC-Loss Delay(Hrs)
0
Cellular Report Date
0

Secutron MR-2300T Specifications

General

Brand	Secutron
Model	MR-2300T
Category	Control Panel
Language	English