Secutron MR-2320 Series User Manual

45
Configuration
9.4 Command Menu
The main command menu is pictured below. The first line of the LCD will always show “-
Command Menu-“, and the second line scrolls through different selections. Use the “UP” and
“DOWN” keys to scroll through the menu, and press the key to make a selection. To exit
from the main command menu, select the “Exit” menu option and then press either the or
key.
Figure 22 Command Menu
Pressing “LAMP TEST” at any time will show the information about the system and the
software version. The first line shows the panel mode number and pre-programmed mode.
The second line shows the software version number. The version of the software is read as
Major.Minor.Revision.
Note: Command Menu Item 1 and 6 can only be accessed if jumper JW6 is placed on
the main board.
X
i
Access level Required
Configuration
Configuration
Configuration
Command
Command
Command
Command

Secutron MR-2320 Series Specifications

General

Brand	Secutron
Model	MR-2320 Series
Category	Control Panel
Language	English