Secutron MR-2320 Series User Manual

53
Configuration
9.7 3. Set password (Command-Menu)
The user can change the password only for the current access level as well as any lower
levels.
Note: Refer to How to Use the Keypad to Program the MR-2320 on page 44 for
detailed instructions on making menu selections.
First choose the level of password to
be changed
Then
If the passcode does not match, the
following message appears and the
system exit to the main menu
If the passcode is OK the following
message appears and exits to the main
menu
0 -> Default
Use this function to change
the pass-code. The
minimum number of digits is
4 and the maximum is 10.
Only numeric digits are
allowed.
i
Select Access Level
0
Enter new passcode:
Re-enter new passcode:
invalid passcode
passcode updated

Secutron MR-2320 Series Specifications

General

Brand	Secutron
Model	MR-2320 Series
Category	Control Panel
Language	English