79
Pre-Programmed Modes
11.13.4 How the Panel Works in Mode 13
• Activation of any one among Z-1, Z-2 or Z-3 changes Hazard Area 1 state into Alarm.
Release Timer-1 is started. NAC-1 turns on at Temporal. Upon the expiration of Release
Timer-1, NAC-1 turns on steady. RAC-1and RAC-2 are activated.
• Activation of Z4 or Z-5 can be indicated on NAC-2 at 20 BPM, if configured.
• Activation of Z-6 turns NAC-1 and NAC-2 steady.
To Next Page
Loading...
