Seg WIC1 User Manual

Description Information Corrective Action
at menu [Settings / Device
Connection...].)
• Check the wiring between PC and•
device.
• Wait for 15 minutes and then try•
again to connect to the device.
•
Restart your PC and then try again
•
to connect to the device.
No communication (data transfer)
with Smart view possible, even though a
connection has been established.
Required TCP/IP ports are not
available.
Make sure that all TCP/IP ports in the
range 52152 … 52164 are available.
They must neither be blocked by a
󰊟rewall nor be used by any other
software.
245WIC1WIC1-1.0-EN-MAN
10 Troubleshooting
10.4.5 Communication

Seg WIC1 Specifications

General

Brand	Seg
Model	WIC1
Category	Relays
Language	English