Seg WIC1 - Setting of the Rated CT Current in

11.1.3
Setting of the Rated CT current In
WIC1‑2: DIP switch block 1, switches 1…4
WIC1‑3: HEX switch 1
The primary values in Ampere in the following tables depend on the CT type. (See also the
considerations in ╚═▷ “3.3.2 Selection of a WIC1-Compatible Current Transformer”.)
(CT types: See ╚═▷ “2.6.1.3 Order Form of the WIC1-Compatible Current Transformers”)
Related setting via DiggiMEC or via Smart view:
• [Field Para / CT] »CT . In,relative«, see also ╚═▷ “4.2 Field Parameters”.•
This is a relative rated current in units of [In
,min
], i. e. a rated current value without
the CT type dependency.
254 WIC1 WIC1-1.0-EN-MAN
11 Appendix
11.1.3 Setting of the Rated CT current In