Seg WIC1 User Manual

2.5 Comments on the Manual
This manual explains in general the tasks of device planning, parameter setting, installation,
commissioning, operation and maintenance of the WI Line devices.
The manual serves as working basis for:
• Engineers in the protection 󰊟eld,•
• commissioning engineers,•
• people dealing with setting, testing and maintenance of protection and control•
devices,
•
as well as trained personnel for electrical installations and power stations.
•
All functions concerning the type code will be de󰊟ned. Should there be a description of any
functions, parameters or inputs/outputs which do not apply to the device in use, please
ignore that information.
All details and references are explained to the best of our knowledge and are based on our
experience and observations.
This manual describes the (optionally) full featured versions of the devices.
All technical information and data included in this manual re󰊠ect their state at the time this
document was issued. We reserve the right to carry out technical modi󰊟cations in line with
further development without changing this manual and without previous notice. Hence no
claim can be brought based on the information and descriptions this manual includes.
Text, graphic and formulae do not always apply to the actual delivery scope. The drawings
and graphics are not true to scale. We do not accept any liability for damage and operational
failures caused by operating errors or disregarding the directions of this manual.
No part of this manual is allowed to be reproduced or passed on to others in any form, unless
SEG have approved in writing.
This user manual is part of the delivery scope when purchasing the device. In case the
device is passed on (sold) to a third party, the manual has to be handed over as well.
Any repair work carried out on the device requires skilled and competent personnel who
need to be well aware especially of the local safety regulations and have the necessary
experience for working on electronic protection devices and power installations (provided
by evidence).
Information Concerning Liability and Warranty
SEG does not accept any liability for damage resulting from conversions or changes carried
out on the device or planning (projecting) work, parameter setting or adjustment changes
done by the customer.
The warranty expires after a device has been opened by others than SEG specialists.
Warranty and liability conditions stated in SEG General Terms and Conditions are not
supplemented by the above-mentioned explanations.
27WIC1WIC1-1.0-EN-MAN
2 WIC1 – Introduction and General Information
2.5 Comments on the Manual

Seg WIC1 Specifications

General

Brand	Seg
Model	WIC1
Category	Relays
Language	English