Sega AV F-ZERO AX - Page 40

−33−
②Connectoneendoftheearthwireto
theACUnitearthterminal,andthe
otherendtotheindoorearthterminal.
TheACUnitearthterminalhasaBolt
andNutcombination.Takeoffthe
Nut,passtheendofearthwire
throughtheBolt,andfastentheNut.
<ForTaiwan>
*NotethattheEarthWireis
incorporatedinthePowerCordfor
theAreasofAC120V(USA)and
AC220 〜 240V,andtherefore,this
procedureisnotnecessary.
ConnecttheEarthWire
totheEarthTerminal.
③Firmlyinsertthepowerplugintothe
socketoutlet.
InserttheoppositesideofPowerCord
plugtotheACUnit'sconnector
("INLET").
④ PerformwiringforthePowerCord
andEarthWire.Installprotective
coveringforthePowerCordand
EarthWire.
WiringCover
HOWTOUSETHECORDCLAMP
IncasethePowerPlugisapttocomeoutofplace,securethe
PowerCordtotheperipheryoftheACUnitwiththeCord
Clamp(anaccessory).
FIG.6.4c ConnectingPowerCordandEarthWire
FIG.6.4b *EarthWireConnection