Sega Let’s Go ISLAND! - Page 103

94
ERROR MESSAGE
DISPLAY Error 6014
The SEAT MOTOR is using abnormal encoder data.(ROLL)
CAUSE There is an abnormality in the SEAT MOTOR (ROLL) encoder data.
COUNTERMEASURES Make sure all the wires between the front and rear cabinets are connected. If the error
is still displayed after a restart, it is likely a faulty wire between the SEAT MOTOR
DRIVE BD (ROLL) and SEAT MOTOR (ROLL) or a faulty SEAT MOTOR DRIVE
BD (ROLL) or SEAT MOTOR (ROLL). Contact your point of purchase or the ofce
listed in this manual.
DISPLAY Error 6015
An overcurrent has passed through the SEAT MOTOR.(ROLL)
CAUSE There was an overcurrent in the SEAT MOTOR (ROLL).
COUNTERMEASURES If the error is still displayed after a restart, it is likely a faulty SEAT MOTOR DRIVE
BD (ROLL) or SEAT MOTOR (ROLL). Contact your point of purchase or the
ofcelisted in this manual.
DISPLAY Error 6019
The SEAT VOLUME is abnormal.(ROLL)
CAUSE There is something wrong with the SEAT VOLUME (ROLL).
COUNTERMEASURES Refer to 14-2-1 “ROLL VOLUME ADJUSTMENT” and adjust the volume. If the
error persists, it is likely a faulty volume. Replace the volume.
19