27
ASSEMBLY AND INSTALLATION
Prepare the DVD software kit.
1
Turn the power switch on the cabinet connected to the DVD DRIVE to ON.
2
The RINGWIDE startup image appears on the screen.
3
Wait for at least 1 minute. The monitor of the cabinet connected to the DVD DRIVE will display “Please
Insert Disc”.
4
Remove 1 thumbscrew, and then remove DVD DRIVE case lid.
6
Press the DVD DRIVE switch and the tray returns to its original position. Software installs automatically
from the DVD to the RINGWIDE. Do not turn off power to the cabinet during the installation.
7
When installation is finished, the initialization operation will be performed automatically. When the
advertising screen is displayed, the initialization operation is complete.
8
Press the DVD DRIVE switch to have the tray come out, and then remove the DVD.
9
Press the DVD DRIVE switch to have the tray return. When the power is cut off the tray will not move.
5
Press the DVD DRIVE switch. The DVD DRIVE tray comes out. Set the DVD from the DVD software kit
into the tray. Always have the DVD label side facing upward.
6
To Next Page
Loading...
Need help?
General
