Impulse 300D – User Manual
Page 12 (67)
1.3 Rear Panel Overview
The IMPULSE 300D comes standard with all of the hardware listed below.
1. Power Supply
2. RJ45 Network 1/2 Ports
3. CVBS Output Connector
4. SDI Output Connector
5. RCA connection for Analog Audio
6. HDMI Output Connector
1.4 Cooling
The IMPULSE 300D is cooled via forced induction through the front of the unit and
exhausted through the vents in the rear of the chassis.
1.5 Rack Information
The IMPULSE 300D is versatile and was designed to be deployed as a standalone
device for easy installation into locations with limited space. With the optional 300D-
MOUNT kit, three (3) IMPULSE 300D units can be deployed in a standard 19”.
Figure 1: IMPULSE 300D Rack Mount Kit
To Next Page
Loading...
