Sencore Impulse 300D - Appendix C - Specifications

Impulse 300D – User Manual
Page 61 (67)
Appendix C – Specifications
IMPULSE 300D –
Output Interfaces
Interfaces –
SD/HD-SDI/3G-SDI:
1x 75Ω BNC SDI
SMPTE 259M
SMPTE 292M
SMPTE 424M
Digital Video:
1x HDMI Type A Connector with positive screw
retention
Supported Version:
2.0
Composite Video Output:
1x 75Ω BNC
NTSC, PAL
Analog Audio:
2x RCA (L/R)
IP –
Physical Interface:
1x RJ45, 10/100/1000 auto-negotiating
Output Format:
UDP or RTP
Constant Bitrate –
IP Encapsulation:
1 to 7 TS Packets per IP Packet
Protocols:
Unicast and Multicast
IGMP Compatability:
Version 1, 2 and 3
TS Bitrate:
250 Kbps to 30 Mbps
Input Interfaces
IP –
Physical Interfaces:
1x RJ45, 10/100/1000 auto-negotiate
Output Format:
UDP or RTP
Constant Bitrate -
IP Encapsulation:
to 7 TS Packets per IP Packet
Protocols:
Unicast & Multicast
HLS
SRT
RIST*
Zixi
RTMP*
IGMP 61ompatibility:
Version 1, 2 and 3
TS Bitrate:
250 Kbps to 30 Mbps
Input Redundancy*
Descrambling:
AES 128/256
Video Processing
Codec/Profile:
MPEG-2 up to MP@HL
H.264 up to HP@L4.2
HEVC up to MP@5.1
AVS-P16 (AVS+)