Sencore Impulse 300D - Page 60

Impulse 300D – User Manual
Page 60 (67)
SRT Receive Decryption
Error
The system has errors when trying to decrypt SRT signal.
SRT Receive Lost
Packets Error
The system has detected lost packets in the received SRT
signal.
SRT Skipped Packets
Error
The system has detected skipped packets in the received SRT
signal.
SRT Transmit Connection
Error
The system has detected a connection error when transmitting
SRT signal.
SRT Transmit Dropped
Packets Error
The system has detected lost packets in the transmitted SRT
signal.
SRT Transmit NAK
Received Error
The system has received a loss report from the receiver during
the ARQ exchange and will retransmit packets.
Service Not Found
Service Lock service selection mode is enabled but service
defined by user is not present in the incoming stream.
Software Update Failed
An attempted software update was unsuccessful.
Software Update
Succeeded
An attempted software update succeeded.
TS Sync Loss Error
The system has detected the loss of sync in the transport
stream.
Transport Stream Not
Present
The IMPULSE 300D has detected that the transport stream from
the active input is no longer present.
UHD Video Unsupported
Without UHD4K decoding license and video type is UHD4K.
Video Not Decoding
The configured service or video PID to be decoded is not being
successfully decoded by the IMPULSE 300D.
Zixi Bitrate Exceeded
Error
Total incoming transport stream bitrate has exceeded 30 Mbps.
Zixi Receive Connection
Error
The system encountered a connection error when receiving Zixi
transmission.
Zixi Receive Decryption
Error
The system has errors when trying to decrypt Zixi signal.
Zixi Receive Dropped
Packets Error
The system has detected dropped packets in the received Zixi
signal.
Zixi Receive Not
rRcovered Packets Error
The system is reporting that retransmitted packets were not
recovered in the received Zixi signal.
Zixi Transmit Connection
Error
The system has detected an error when connecting to server to
begin transmission.
Zixi Transmit Dropped
Packets Error
The receiving system is reporting that packets were dropped in
the transmitted Zixi signal.
Zixi Transmit Not
Recovered Packets Error
The receiving system is reporting that retransmitted packets
were not recovered in the transmitted Zixi signals.