Sencore Impulse 300D - Reboot Unit; Reset Defaults

Impulse 300D – User Manual
Page 48 (67)
4.3.10 Reboot Unit
The IMPULSE 300D can be rebooted from the web interface. In order to perform a
reboot click the button. The IMPULSE 300D will prompt the user to confirm
the reboot. Once the reboot is complete the login screen will appear allowing the web
interface to be logged into.
4.3.11 Reset Defaults
The IMPULSE 300D settings can be reset to factory defaults. All settings will be returned
to the factory defaults except the network management ports TCP/IP settings. All event
logs will be cleared. To reset all settings to default click the button.
The IMPULSE 300D will prompt the user to confirm the reset.