Sencore Impulse 300D - Event Logs

Impulse 300D – User Manual
Page 51 (67)
4.4.2 Event Logs
Clicking on the button displays the Event Log menu. This list displays all of the
events and alarms that have affected the unit. The IMPULSE 300D stores up to 2000
events worth of logs. The logs can be cleared manually by clicking the button.
The logs can be downloaded as a .tsv file and saved to an external location by clicking
the button. There are five columns in the log that display different types of
information.
Title
Description
Severity
This column displays the nature of the alarm. The icon means the
log entry is informational and is not an error. The icon means the
log entry is an active alarm.
Timestamp
This column displays the date and time the error was raised or cleared.
This date and time correlates with the Date and Time settings
configured in Section 4.3.8.
Transition
This column displays when an alarm transition from a bad to good
state. When an error is raised the icon is displayed. When an error
is cleared the icon is displayed. When an event takes place the
icon is displayed.
Message
This column displays the description of the error or event. The function
or hardware that experienced the event or error is described here.
Location
This column displays the hardware or function that experienced the
alarm or event.