Sencore Impulse 300D - Page 62

Impulse 300D – User Manual
Page 62 (67)
AVS2 Main-10bit Profile@ L 8.2.6
Resolutions:
2160p@23.98, 24, 25, 29.97, 30, 50, 60
1080p@23.98,24,25, 29.97, 30, 50, 59.94, 60
1080i@25, 29.97, 30 720p@ 50, 59.94, 60 576i@25
480i@ 29.97
Aspect Ratio:
Automatic or manual (4:3 or 16:9)
Bitrate: up to 30 Mbps
Audio Processing
Dolby Digital (AC-3)
Dolby Digital Plus (E-AC-3)
AAC HE-AAC
MPEG-1 L2
Audio Codecs Supported:
MPEG-2 up to MP@HL
H.264 up to HP@L4.2
HEVC up to MP@5.1
AVS-P16 (AVS+)
AVS2 Main-10bit Profile@ L 8.2.
Output Formats:
Linear PCM
Dolby Digital pass-through*
PCM (down mixed for 5.1 Sources)
Analog (down mixed for 5.1 Sources)
Audio Sampling Rate:
48 KHz
Ancillary Data Pass-through:
AFD (SMPTE 2016)*
Closed Captions (EIA-608, EIA-708)
Operation Modes
Live:
Decoding to HDMI/SDI or CVBS
Playback*:
Local: USB Flash, SD Card, In order
HDMI/SDI/CVBS or IP outputs
Recording*:
Local: USB flash, SD Card
Format: TS, MOV, MP4
Circling recording (by time or size of file)
Connector:
1x RJ-45 10/100/1000 Auto Negotiating
Protocols:
HTTP(S), SNMP* and Web API*
User Interfaces:
Full control via web GUI
Full control via intuitive front panel
Automation Interfaces:
Full status and control via SNMP*
Configurable SNMP traps *
Web services API*
Syslog message logging
Firmware Updates:
Via Web Gui
Other I/O:
1 x USB 2.0
1 x SD Card Standard Interface
LCD x 1, Front button x 6