Sencore Impulse 300D - Page 32

Impulse 300D – User Manual
Page 32 (67)
4.2.2.4 Configuring Zixi Input
This menu configures the reception of Zixi input. The Zixi input can be configured via a
remote host.
Setting
Range
Description
Receive
Enabled
Disabled
Enable/Disable the Zixi Input
Interface
Network 1
Network 2
The physical Ethernet connector on which
to receive the Zixi traffic
Remote Host
xxx.xxx.xxx.xxx or url
The IP address or domain name of the
remote host broadcaster
Alternate Remote
Host
xxx.xxx.xxx.xxx or url
The alternate IP address or domain name
of the remote host broadcaster
Remote Port
1 – 65535
Defines the port of the stream on the
remote device
Stream ID
Specified by Zixi
broadcaster
Zixi stream ID
Remote ID
Specified by Zixi
broadcaster
Reciever ID