Using the “Conference Manager” software
144 | ADN Digital Conference System
“Info”
“Warning“
Column “Description“ “Location“ Meaning
Conference Recording [CU Main
######]
Audio recording started
Conference Recording Off [CU Main
######]
Audio recording stopped
HW Version #/
VARIOUS
[DU / PU] /
[CUSB]
Hardware versions of the
ADN D1 chairperson unit
(“DU”) or ADN C1 delegate unit
(“PU”) or the ADN CU1 central
unit (“CUSB”);
are different (“VARIOUS”)
HW Version #/
VARIOUS
[Power Supplies] Hardware version of the
ADN PS power supply;
is different(“VARIOUS”)
SW Version #.#.#.# [DU / PU] /
[CUSB]
Software version of the ADN D1
chairperson unit (“DU”) or
ADN C1 delegate unit (“PU”)
or the ADN CU1 central unit
(“CUSB”)
SW Version #.#.#.# [CU Main
######]
Software version of the
ADN CU1 central unit
(“CU Main”)
SW Version VARIOUS [DU / PU] /
[CUSB]
Software versions of the
ADN D1 chairperson unit
(“DU”) or ADN C1 delegate unit
(“PU”) or the ADN CU1 central
unit (“CUSB”) are different
Topology update: Found
connected conference
units=##, Power
Supplies=##
[CU Main
######]
The set up of the conference
system has been changed; con-
ference units and/or power
supplies have been added or
removed
Column “Description“ “Location“ Meaning
Available USB device space
below 500 MB
[CU Main
######]
Available memory space on
the USB mass storage device
< 500 MB
Bus Error (### Frames) [CU Main
######]
Data transmission error;
number of lost data frames
Chairperson unit S/N:
###### at pos.### NOT
INITIALIZED
[CU Main
######]
The chairperson unit is not
initialized
Conference Reinit due to
inconsistent topology
[CU Main
######]
Re-initialization due to inconsis-
tent set up of the conference
system
Device Temperature
Overheat/OK
[CU Main
######]/
[PS ######]
Temperature of the central
unit/power supply is within the
permissible range (“ok”)/too
high (“overheat”)
Fan status:
Fan1=ALERT/OK;
Fan2=ALERT/OK
[CU Main
######]/
[PS ######]
Fan 1/2 of the central unit/
power supply is in operation
(“ok”)/has failed (“ALERT”)