Sennheiser ADN C1 - Page 147

Using the “Conference Manager” software
146 | ADN Digital Conference System
Set Floor Mix=##
denied => Value out of
range(##..##)
[CU Main
######]
Automatic volume reduction
could not be changed because
the value is out of the permis-
sible range
Set Floor Volume=##
denied => Value out of
range(##..##)
[CU Main
######]
Volume of the floor channel
could not be changed
(“denied”) because the value
is out of the permissible range
Set Microphone limit=##
denied => Value out of
range(##..##)
[CU Main
######]
Number of speakers who can
take the floor simultaneously
could not be changed
(“denied”) because the value
is out of the permissible range
Set Operating Mode=##
denied => Value out of
range(##..##)
[CU Main
######]
Operating mode of the central
unit (e.g. initialization mode or
conference mode) could not be
changed (“denied”) because
the value is out of the permis-
sible range
Set Premonition Time=##s
denied => Value out of
range(0..##s)
[CU Main
######]
Advance warning time could
not be changed (“denied”)
because the value is out of
the permissible range
Set Request Limit=##
denied => Value out of
range(##..##)
[CU Main
######]
Maximum number of requests
to speak could not be changed
(“denied”) because the value
is out of the permissible range
Set Speaker Feedback
Suppression=##
denied => Value out of
range [##.##]
[CU Main
######]
Feedback suppression function
could not be changed
(“denied”) because the value
is out of the permissible range
Set Talk Time Limit=##min
denied => Value out of
range(##min..##min)
[CU Main
######]
Speaking time limit could
not be changed (“denied”)
because the value is out of
the permissible range
Set Talk Time=##s
denied => Conflict with
existing premonition
time=##s
[CU Main
######]
Speaking time limit could not
be changed due to conflicts
with the advance warning time
(“denied”) because the value
is out of the permissible range
Set XLR In Sensitivity=##
denied => Value out of
range(##..##
[CU Main
######]
Sensitivity of the XLR IN
input could not be changed
(“denied”) because the value
is out of the permissible range
Set XLR Out Feedback
Suppression=##
denied => Value out of
range [##..##]
[CU Main
######]
Function for eliminating feed-
back and for increasing the
volume of the XLR OUT audio
output could not be changed
(“denied”) because the value
is out of the permissible range
Set XLR Out Volume=##
denied => Value out of
range(##..##)
[CU Main
######]
Volume of the XLR OUT audio
output could not be changed
(“denied”) because the value
is out of the permissible range
Column “Description“ “Location“ Meaning