Sennheiser ADN C1 - Page 55

Configuring the conference system via the central unit
54 | ADN Digital Conference System
Activating/deactivating the flashing of the signal light ring when a request to
speak is made – “Blink on Request”
Possible settings: “On” and “Off”
Re-initializing the conference units – “Re-Init”
If you connect chairperson units to the conference system during a running confer-
ence, you have to re-initialize them.
When conference units are re-initialized, the conference will be interrupted. An
audio recording on a USB mass storage device will not be stopped.
Possible settings: “Yes” and “No”
Setting the function of the priority key – “Clear Request List on Cancel”
This menu item allows you to set the function of the priority key of the ADN C1
chairperson unit.
Possible settings: “On” and “Off”
Select and call up the
“Conference” submenu
Select and call up the
“Blink on Request”
menu item
Select the desired
setting; store the
setting
Main Menu
Conference
Audio
System
Conference
Premonition Time Limit
Reaction on Talktime exceed
Blink on Request
Blink on Request
On
Off
On On


Setting Behavior of the signal light ring
“On” When a participant makes a request to speak, the microphone
LED flashes green and the signal light ring flashes red.
The participant him or herself sees the flashing microphone LED
whereas the other participants see the flashing signal light ring
which indicates that a request to speak has been made.
“Off” When a participant makes a request to speak, the microphone
LED flashes green.
All other participants cannot see that this participant has made
a request to speak.
쐊
쐇
쐊
쐇
쐊
Select and call up the
“Conference” submenu
Select and call up the
“Re-Init” menu item
Select the desired
setting; store the
setting
Main Menu
Conference
Audio
System
Conference
Reaction on Talktime exceed
Blink on Request
Re-Init
Re-Init
Yes
No
쐏

Setting Function of the priority key
“On“ Pressing the priority key deactivates all ADN D1 delegate units.
All requests to speak are deleted.
“Off“ Pressing the priority key deactivates all currently active ADN D1
delegate units.
All requests to speak are retained.
쐏
Select and call up the
“Conference” submenu
Select and call up the
“Clear Request List on
Cancel” menu item
Select the desired
setting; store the
setting
Main Menu
Conference
Audio
System
Conference
Blink on Request
Re-Init
Clear Request List on Cancel
Clear Request List on Cancel
On
Off
On Off