Sennheiser ADN C1 - Using the Conference Manager Software

ADN Digital Conference System | 79
Running a conference
Monitoring an audio recording The CU1 display panel displays the status of the audio recording:
To view the recording status and the available memory space:
왘 Call up the “Recording status” submenu.
The recording status and the available memory space are displayed.
Stopping an audio recording
왘 Call up the “Record” menu item and select “Off”.
The recording is stopped. The CU1 display panel does not display the recording
icon.
Using an audio recording
The recorded wav files can be played with a variety of media programs, including
e.g. Windows Media Player or Apple QuickTime Player.
Direct Access 30 Units
22
O
Icon
Meaning
Audio recording in progress
flashing Memory space < 500 MB
Depending on the number of channels recorded, the memory
capacity will suffice for approx. 15 minutes of recording.
Change the USB mass storage device or stop the recording.
After finishing the audio recording, data is still written to the
mass storage device.
The central unit’s
display panel
lights up red.
An error occured during recording. The recording was inter-
rupted.
O
Select and call up the
“Conference Recording”
submenu
Select and call up the
“Recording status”
menu item
View the information;
exit the menu item
Conference Recording
Record
Recording status
Off
Recording status
Status : Off
Free Space avail.: 234 GB
Main Menu
Audio Menu
Conference Recording
Select and call up the
“Conference Recording”
submenu
Select and call up the
“Record” menu item
Select the desired
setting; store the
setting
Conference Recording
Record
Recording status
Off Off
Record
On
Off
Main Menu
Audio Menu
Conference Recording
Make regular backups of the recorded audio files on independent media to
guard against data loss.