Sequential TRIGON-6 - Effect Types Available

27
Trigon-6 Operation Manual
Effects
Effects are divided into sets A and B. You can choose a single effect from
each set. Effect A and B are applied one after another, in series. For this
reason, reverb effects are only available as Effect B, since it’s the last
stage in the serial effects chain, where reverb is traditionally applied.
Either effect can also be set to “off.”
Effect A:
• “bbd” - vintage bucket-brigade emulation
• “ddl” - classic digital delay
• “CHO” - vintage chorus
• PH1” vintage 6-stage phaser, high resonance
• “PH2” vintage 6-stage phaser, lower resonance
• “PH3” emulation of Tom Oberheim’s original phaser design
• “rin” ring modulator
• “FL1” vintage anger, high resonance
• “FL2” vintage anger, low resonance
Effect B:
• “bbd” - vintage bucket-brigade emulation
• “ddl” - classic digital delay
• “CHO” - vintage chorus
• PH1” vintage 6-stage phaser, high resonance
• “PH2” vintage 6-stage phaser, lower resonance
• “PH3” emulation of Tom Oberheim’s original phaser design
• “rin” ring modulator
• “FL1” vintage anger, high resonance
• “FL2” vintage anger, low resonance
• “HAL” - classic hall emulation
• “rOO” - classic room emulation
• “PLA” - classic plate emulation
• “SPr” - vintage guitar-amp-style spring emulation