44
Sequencer
Sequential
Master Volume/Program Volume
The master output level of the Trigon-6 is controlled by the front-panel
master vol knob. In addition, the volume of an individual program
can be set with the prgm vol knob in the misc parameters section. This
is useful for ensuring that your sounds have roughly the same volume
from program to program. Unison sounds in particular can be very loud
compared to other programs.
The Volume knob
The program volume knob (prgm volume) in the Miscellaneous Parameters section
To set the volume of an individual program:
1. Choose a program.
2. In the misc parameters section, turn the prgm vol knob to set its
volume.
3. Save the program. (See “Saving a Program” on page 4.)
MIDI volume can also inuence the overall volume of the Trigon-6 if you are
controlling it from an external MIDI source.
To Next Page
Loading...
