45
Trigon-6 Operation Manual
Distortion
Distortion
The Trigon-6 provides stereo analog distortion. This can be used to
add warmth, harmonic complexity, and an aggressive edge to sounds.
The character of the distortion is affected by the harmonic content of a
program. Sounds with more high-end will sound different than sounds
with fewer harmonics. To add distortion, use the distortion knob.
Vintage
Introduces parameter variations from voice to voice. This electronic
circuit variation behavior was a big part of why vintage synths sounded
so warm, organic, and alive. Turning up the vintage knob adds progres-
sively more variation between voices. Try it out!
Pan Spread
Pans the audio in the stereo eld individually per voice. Set to 0, all
voices are panned to the center. As Pan Spread is turned up, the audio in
each voice is gradually moved away from the center by greater amounts.
Every other voice goes in a different direction, left or right.
Pgm Volume
Adjusts the overall volume of an individual program.
There is enough gain in the Trigon-6 that if you set some programs to a high
program volume, clipping distortion may occur. If this happens, try lowering the program
volume, the volumes of the oscillators, or the resonance parameter of the lter.
P Wheel Range
0...12 Semitones— Selects the range in semitones when moving the
Pitch Wheel forward or backward. Twelve semitones equals 1 octave.
To Next Page
Loading...
