53
Trigon-6 Operation Manual
Globals
Globals
Global settings are parameters that affect all programs. These include
settings such as Master Tune, MIDI Channel, MIDI Clock, and others.
Global parameters are printed in two rows the program number switches
(0 - 9). Press the Globals switch once to access the top row. Press it twice
to access the bottom row. For details on the various Global parameters,
see “Global Settings” on page 12.
The Globals button
To change a Global setting:
1. Press the globals button. Pressing it once accesses the top row of
Global parameters. Pressing it twice accesses the top row of Global
parameters. The LED indicates which row is active.
2. Press the program selector button that corresponds to the Global
parameter you want to change.
3. Use the bank/decrement and tens/increment buttons to step through
the available settings until you reach the one you want.
4. When nished, press globals again to exit.
Pressing the globals button three times in a row saves the current program as
the default program that appears when you turn on the Trigon-6.
To Next Page
Loading...
