58
Calibrating the Trigon-6
Sequential
FX Mix A : Selects the effects a dry<>wet parameter as an aftertouch
modulation destination. With a positive amount setting, pressing the keys
harder will increase the amount of Effect A’s wet mix. With a negative
amount setting, pressing the keys harder will decrease the level of Effect
A’s wet mix.
FX Mix B : Selects the effects b dry<>wet parameter as an aftertouch
modulation destination. With a positive amount setting, pressing the keys
harder will increase the amount of Effect B’s wet mix. With a negative
amount setting, pressing the keys harder will decrease the level of wet
mix.
Exporting Programs and Banks
You can use the pgm dump command in the globals section to transmit the
current program, bank, or all banks in SysEx format via the selected
MIDI port. This allows you to save your programs so that you can share
them or archive them.
To export a program or bank as a SysEx le over MIDI:
1. Press the globals button once (this enables the upper set of parameters)
then press program selector 8 to select the midi sysex command.
2. Use the bank/decrement and tens/increment buttons to select the
appropriate MIDI port — MIDI (MID) or USB (usb).
3. Press globals a second time (this enables the lower set of parameters)
then press program selector 8 to select the pgm dump command. The
write button begins ashing.
4. Use the bank/decrement and tens/increment buttons to select the
desired option — program (PRO), tens (ten), bank (ban), user banks
(USR), all (all).
5. Press write. The program or bank is exported.
Dumped programs will load back into the same bank and program location in
memory when received by the Trigon-6 via MIDI.
To Next Page
Loading...
