81
Trigon-6 Operation Manual
Appendix D: Support
The Trigon-6 plays out of tune.
Check Master Tune (Global button 1). If it seems correct, calibrate the
oscillators and lters.
To calibrate the oscillators and lters:
1. Hold down the button and press 0.
2. e front panel LEDs and display begin ashing as the Trigon-6
performs its auto-calibration procedure. Don’t turn o the power while
it’s doing this.
3. When nished, the front panel controls will return to normal and you can
play the Trigon-6 again.
. It is not necessary to run the calibration routine on a regular basis. You should only
run it if you are experiencing problems.
To Next Page
Loading...
