6.5 Scanner Power Time-Out Timer
When there is no activity within a specified time period, the scanner enters low power mode. Scan the
appropriate scanner power time-out bar code to change the time-out duration (in seconds).
No time-out *30s 120s 300s
6.6 Scanner Power Off Timer
No power off *10min 30min 60min
6.7 QR code for translate to Chinese
*Export ASCII Export word Export TXT and Excel in Chinese
Chapter 7 Beeper and LED settings
7.1 Power On tone Control
When the scanner is powered on, the start sound can be set to on or off.
Power on tone off * Power on tone On
7.2 Beeper – Good Read
The beeper may be programmed On or Off in response to a good read. Turning this option off, only turns
off the beeper response to a good read indication.
Good read beep Off *Good read beep On
To Next Page
Loading...