Code39 Maximum Message Length
Scan the barcodes below to change the maximum message length, Maximum Default=48
Maximum Message Length Save
Code39 Full ASCII
If Full ASCII Code 39 decoding is enabled, certain character pairs within the barcode symbol will be
interpreted as a single character. For example: $V will be decoded as the ASCII character SYN, and /C
will be decoded as the ASCII character #. Default = Off
*Code39 Full ASCII Off Code39 Full ASCII On
12.5 Interleaved 2 of 5
Interleaved 2 of 5 On or Off
* Interleaved 2 of 5 Off Interleaved 2 of 5 On
Interleaved 2 of 5 Check Digit
*The scanner reads and transmits Interleaved 2 of 5 barcode data with or without a check character.
The scanner will only read Interleaved 2 of 5 barcodes printed with a check character, but will not transmit
the check character with the scanned data.
The scanner will only read Interleaved 2 of 5 barcodes printed with a check character, and will transmit
To Next Page
Loading...