ENA/JAN-8 Off *ENA/JAN-8 On
EAN/JAN-8 Check Digit
This selection allows you to specify whether the check digit should be transmitted at the end of the
scanned data or not. Default = On.
Off * On
12.12 PDF417
PDF417 On or Off
PDF417 Off *PDF417 On
PDF417 Minimum Message Length
Scan the barcodes below to change the minimum message length, Minimum Default=1
Minimum Message Length Save
PDF417 Maximum Message Length
Scan the barcodes below to change the maximum message length, Maximum Default=2750
Maximum Message Length Save
MicroPDF417 On of Off
*MicroPDF417 Off MicroPDF417 On
MicroPDF417 Minimum Message Length
Scan the barcodes below to change the minimum message length, Minimum Default=1
Minimum Message Length Save
MicroPDF417 Maximum Message Length
Scan the barcodes below to change the maximum message length, Maximum Default=366
Maximum Message Length Save
To Next Page
Loading...