Scan the barcodes below to change the minimum message length, Minimum Default=4
Codabar Maximum Message Length
Scan the barcodes below to change the maximum message length, Maximum Default=60
12.4 Code 39
Code 39 On or Off
Code39 Off *Code 39 On
Code39 Start/Stop Characters
Start/Stop characters identify the leading and trailing ends of the barcode. You may either transmit, or not
transmit Start/Stop characters. Default = Don’t Transmit.
* Don’t Transmit Transmit
Code39 Check Character
*The scanner reads and transmits Code 39 barcode data with or without a check character.
The scanner will only read Code39 barcodes printed with a check character, but will not transmit the
check character with the scanned data.
。
The scanner will only read Code39 barcodes printed with a check character, and will transmit this
character at the end of the scanned data.
。
Code39 Minimum Message Length
Scan the barcodes below to change the minimum message length, Minimum Default=1
Minimum Message Length Save
To Next Page
Loading...