SEW-Eurodrive DFE24B EtherCAT - Connection and Terminal Description of the DFE24 B Option; Part Number

18
Manual – Fieldbus Interface DFE24B EtherCAT®
4
Connection and terminal description of the DFE24B option
Assembly and Installation Notes
4.4 Connection and terminal description of the DFE24B option
4.4.1 Part number
EtherCAT
®
interface option DFE24B: 1821 126 7
INFORMATION
•The "EtherCAT
®
interface option DFE24B" is only possible in connection with
MOVITRAC
®
B and MOVIDRIVE
®
MDX61B, not with MOVIDRIVE
®
MDX60B.
• Plug the DFE24B option into the fieldbus slot.
Front view of DFE24B Description
DIP switch
Terminal
Function
6764978827
RUN: EtherCAT
®
operating LED
(orange/green)
ERR: EtherCAT
®
error LED
(red)
Shows the operating status of bus electronics and
communication.
Displays EtherCAT
®
errors.
DIP switch AS
F1
Auto-setup for gateway operation
Reserved
LED Link/Activity (green)
X30 IN: Incoming EtherCAT
connection
LED Link/Activity (green)
X31 OUT: Outgoing EtherCAT
connection
Shows that the EtherCAT
®
connection with the
upstream unit is available/active.
Shows that the EtherCAT
®
connection with the down-
stream unit is available/active.
Front view of MOVITRAC
®
B and UOH11B Description Function
155123467
LED H1 (red)
LED H2 (green)
X24 X terminal
System error (only for gateway functionality)
Reserved
RS485 interface for diagnostics via PC and MOVITOOLS
®
Motion-
Studio
01
F1
EtherCAT
AS
RUN
DFE 24B
ERR
INX30OUTX31
OUTX31
X24
H1
H2