SEW-Eurodrive DFE24B EtherCAT - DFE24 B Option for MOVITRAC B and Gateway Housing

86
Manual – Fieldbus Interface DFE24B EtherCAT®
10
DFE24B option for MOVITRAC
®
B and gateway housing
Technical Data
10.2 DFE24B option for MOVITRAC
®
B and gateway housing
6825746443
Option DFE24B (MOVITRAC
®
B gateway)
External voltage supply U = DC 24 V (–15 %, +20 %)
I
max
= DC 200 mA
P
max
= 3.4 W
Standards IEC 61158, IEC 61784-2
Baud rate 100 MBaud full duplex
Connection technology 2 × RJ45 (8x8 modular jack)
Bus termination Not integrated, as bus termination is activated automatically.
OSI layer Ethernet II
Station address Setting via EtherCAT
®
master (display with P093)
XML file name SEW_DFE24B.xml
Vendor ID 0x59 (CANopenVendor ID)
EtherCAT services • CoE (CANopen over EtherCAT
®
)
• VoE (Simple MOVILINK
®
Protocol over EtherCAT
®
)
Firmware status of
MOVIDRIVE
®
B
No special firmware status required.
Tools for startup • MOVITOOLS
®
MotionStudio engineering software version 5.40 and
higher.
• FBG60B keypad
4.5
5.5
28
30
185
257.5
224
234.5
100
22.5
01
F1
EtherCAT
AS
RUN
DFE 24B
ERR
INX30OUTX31
OUTX31
P
i
f
kVA
Hz
n