Manual – Fieldbus Interface DFE24B EtherCAT®
23
4
DFE24B operating displays
Assembly and Installation Notes
4.9.4 Gateway LEDs
LED H1 and H2 LEDs H1 and H2 indicate the communication status in gateway operation.
155123467
LED H1 Sys-Fault (red) Only for gateway function
Condition State Description
Red System error Gateway is not configured or one of the
drives is inactive.
Off SBus ok Gateway is configured correctly.
Flashing Bus scan Gateway checks the bus.
INFORMATION
• LED H2 (green) is currently reserved.
• X terminal X24 is the RS485 interface for diagnostics via PC and MOVITOOLS
®
MotionStudio.
To Next Page
Loading...
