Manual – Fieldbus Interface DFE24B EtherCAT®
61
7
Communication via EtherCAT
®
Operating MOVITOOLS
®
MotionStudio via EtherCAT
®
7.4.2 Configuration of the mailbox gateway in the EtherCAT
®
master
• Activate VoE/EoE support on the EtherCAT
®
controller.
• Activate the connection with the TCP/IP stack and IP routing.
• Specify the IP address of the EtherCAT
®
mailbox gateway. The IP address is usually
assigned by the engineering tool (e.g. TwinCAT) and should not be changed.
In the TwinCAT program of the company Beckhoff, the above settings look as follows:
3267403275
To Next Page
Loading...
