SEW-Eurodrive DFE24B EtherCAT - Starting up Units (Online)

Manual – Fieldbus Interface DFE24B EtherCAT®
67
7
Executing functions with the units
Operating MOVITOOLS
®
MotionStudio via EtherCAT
®
5. Expand the "Parameter tree" to the node you require.
6. Double-click to display a particular group of unit parameters.
7. Press the enter key to finalize any changes you make to numerical values in the input
fields.
7.5.3 Starting up units (online)
Proceed as follows to start up the units (online):
1. Switch to the network view.
2. Click on "Switch to online mode" [1] in the toolbar.
3. Select the unit you want to startup.
4. Open the context menu and select the command [Startup] / [Startup].
The Startup wizard opens.
5. Follow the instructions of the startup wizard and then load the startup data onto your
unit.
947217163
INFORMATION
• For detailed information about unit parameters, refer to parameter list for the
unit.
9007200438771211
[1] "Switch to online mode" icon
[1]
00
I