SEW-Eurodrive DFE24B EtherCAT - Configuring Units

Manual – Fieldbus Interface DFE24B EtherCAT®
55
7
First steps
Operating MOVITOOLS
®
MotionStudio via EtherCAT
®
7.2.3 Configuring units
Proceed as follows to configure a unit:
1. Select the unit (usually the power section [1]) in the network view.
2. Right-click to open the context menu and display the tools for configuring the unit.
The example shows the context menu with the tools for a MOVIFIT
®
unit. The com-
munication mode is set to "online" and the unit is scanned in the network view.
3. Select a tool (e.g. "Parameter tree") to configure the unit.
2446350859
2446355211
[1]