SEW-Eurodrive DFE24B EtherCAT - Page 65

Manual – Fieldbus Interface DFE24B EtherCAT®
65
7
Communication via EtherCAT
®
Operating MOVITOOLS
®
MotionStudio via EtherCAT
®
4. To add an IP address, click on the symbol [Add IP address] [2].
5. Enter the IP address of the mailbox gateway (in the EtherCAT
®
master) in the "IP
address" input field [3] and click the [OK] button.
18014399831358731
[1] "Activate access without master" check box
Note: Activate this check box only if no other
master is available.
If no EtherCAT
®
master is available, you can
activate a parameterization master in
MOVITOOLS
®
MotionStudio.
[2] [Add IP address] button
[3] "IP address" edit box
[2]
[3]
[1]