SEW-Eurodrive MOVIMOT flexible MMF1 C/DBC Series - Page 231

8
Service
Fault/error table
Operating Instructions – MOVIMOT
®
flexible
231
Subfault: 25.13
Description: Control electronics configuration data – CRC error
Response: Output stage inhibit
Cause Measure
Faulty configuration data of control electronics. Contact the SEW‑EURODRIVE Service.
Subfault: 25.14
Description: Calibration data of power section – version conflict
Response: Output stage inhibit
Cause Measure
Wrong version of calibration data of power sec-
tion.
Contact the SEW‑EURODRIVE Service.
Subfault: 25.15
Description: Calibration data of control electronics – version conflict
Response: Output stage inhibit
Cause Measure
Wrong version of calibration data of control elec-
tronics.
Contact the SEW‑EURODRIVE Service.
Subfault: 25.16
Description: Power section calibration data – CRC error
Response: Output stage inhibit
Cause Measure
Faulty calibration data of power section. Contact the SEW‑EURODRIVE Service.
Subfault: 25.17
Description: Control electronics calibration data – CRC error
Response: Output stage inhibit
Cause Measure
Faulty calibration data of control electronics. Contact the SEW‑EURODRIVE Service.
Subfault: 25.18
Description: Power section QA data – CRC error
Response: Warning
Cause Measure
Faulty quality assurance data of power section. Contact the SEW‑EURODRIVE Service.
29129451/EN – 12/2019